CIS 130 Lab Assignment 7 – Word
Processing Tutorial
You will need to use a computer connected to the
Internet.
All lab computers on campus are connected.
Assignment 7 (Part One)--- What to do:
1.
Read the General Instructions for the http://scsite.com/selabs Student Edition
Labs handout.
2.
Load the http://scsite.com/selabs
Student Edition Labs page in Internet Explorer and click on Word Processing. It is the fourth selection
from the bottom in the second column. Complete all 11 topics in this tutorial
(i.e. you will need to complete 11 quizzes).
3.
If you are
finished with the computer at this time, close all open windows and restart the
system.
Assignment 7 (Part One) - What you need to turn in on
the due date:
1.
WORD PROCESSING results (11 topics) labeled as Lab 7-Part
One. (You will have more than one printout if you did not complete all 11
topics at one time. Turn in all relevant printouts with your results for all 11
quizzes. )
Assignment 7 (Part Two) - Microsoft Office Word 2003
--- What to do:
You will need your Microsoft Office 2003 Brief
textbook,
a computer with Windows XP software and at least one blank diskette.
IMPORTANT: Before doing the tutorial, you will need to use the
computers in the lab to copy some files to one or two diskettes or you will
need to download the data files from the Web using the instructions on the
inside back cover of the Office text.
1.
Before going to the lab, read pages WD 3- WD 32 in your Office book and make sure
that you understand all of the key terms on page WD 32.
2.
In the lab, if you have not already booted up
the computer, see Getting started in the lab directions from the General
Lab Information handout.
3.
Put a blank formatted 3 ˝” high density disk
that you label as Word Data Disk into the drive. Be sure to put your
name and class time on the disk label, as well.
4.
Double-click the CIS 130 or Shortcut to CIS
130 folder icon on the computer screen to open it.
5.
Double-click the Office 2003 Data folder icon
to open it.
6.
Double click the Word folder icon to open it.
7.
Right-click the Tutorial.01
folder, then choose Send to and then
click 3 1/2 inch floppy. The Tutorial.01
folder and its contents should be copied to your diskette.
8.
Repeat steps 3-6 with another diskette if you wish to
make a second copy of the files to use in case you need to start over for any
reason.
Open
your Office textbook to page WD 3. Read the Creating a Document chapter and perform
the instructions that appear in the yellow boxes on pages WD 5- WD 31
Assignment 7 (Part Two)- What you need to turn in on
the due date:
1.
Print out of the
“Web Time Contract Letter”. Labeled as Lab
7-Part Two. This step is performed on
page WD 30.
2. Your 3 1/2 inch floppy disk that you labeled as Word Data Disk. This disk contains the “Web Time Contract Letter” that you created in the tutorial.