General
Instructions for the http://scsite.com/selabs
Student Edition Labs:
Important Note: Be sure to print your Apply quiz
results before exiting a tutorial. See step 12 below.
1.
If you have not
already booted up the computer, see Getting started in the lab
directions from the General Information
Concerning Lab Assignments and the Campus Computer Labs handout.
2.
Double-click the
Internet Explorer icon on the computer’s desktop. If the Internet Explorer icon
is not on the desktop, click Start
and choose Internet Explorer from the All Programs menu.
3.
After Internet
Explorer loads, enter http://scsite.com/selabs
in the Address box.
4.
After the Student
Edition Labs page loads, click on the
name of the lab tutorial that you have been assigned. Each tutorial will
contain several topics.
For each
topic within a lab tutorial:
5.
Read the Prepare
page of the current topic. You can put your mouse pointer on the terms that
appear in blue to see their definitions.
6.
Click the Observe button. In Observe mode, use
the Play button to advance the pages and watch all of the demonstrations for
the current topic. The text in the lower left corner describes the actions on
the screen. You can use the scroll bar in that area or the up and down arrow
keys to move through the text so that you can read all of it within the small
text area in which it appears.
7.
After you have
completed all of the Observe demonstrations for the current topic, click the Practice button and follow the step
instructions that appear on the screen.
8.
After you
complete the Practice, click the Apply
button to take the quiz on the current topic.
9.
Answer all of the
questions on that topic, and then click Print
to view your results. Each time your run a tutorial, the first time you click Print, you will need to enter your name
and your class time. For example, if your name is Tom Jones and you are in the
8 AM – 9:15 AM class, enter Tom Jones 8 AM
for your name.
10.
If you did not get 100% on this topic, click the Apply button again and take the quiz
again until you do get 100%.
11.
Unless you have completed all topics assigned or need
to stop at this time, click the flashing yellow arrow to continue to the next
topic in this lab or click view all
and choose the next topic. For each topic start over with step 5 above.
Printing
your results:
12.
If you have completed all required topic quizzes or
have reached a point at which you need to stop at this time, after viewing the
results of your last quiz, click Send to Printer to print your results. Write the
assignment number on the top page of your quiz results. If you have trouble
printing, you may email the results to yourself and then print the email later
and turn that in for the assignment.
Returning to complete a lab tutorial:
13. If you were not able to complete all assigned topics at one time, when you return to the lab tutorial (see steps 1-4 above) click view all and choose the next topic that you need to complete. For each topic start over with step 5 above. Be sure to print the rest of your quiz results. Write the assignment number at the top of the first page of each results print.